
Core Component


Product Advantages
01 High-quality, stable operation
>Pure copper wire winding -GB (Chinese national standard) iron core power with sufficient power, low loss, built-in voltage regulation function. Long-term continuous power supply without heating, and makes stable power generation.
>Brand start accumulator – high quality, maintenance-free, large capacity, small size, continuous discharge without heating. Strong start-up, good shock resistance, anti-detachment, and has a long service life.
>Simple and compact structure – durable cylinder body with long life, low failure rate and high cost performance.
>Environmental test – generate electricity normally in high altitude, high temperature and high cold environment.


02 30 years service life
>High load-bearing communal bottom slab – formed by bending high-quality steel plates of more than 5 mm and treated by electrostatic spraying, anti-rust and corrosion resistance, and has long service life.
>Optional chassis fuel box – continuous operation for 8 hours.
>Radiator of large capacity water cooling unit – quickly and effectively discharge excess heat to ensure the continuous and long-term safe operation.
>High-quality fuel filter – effectively blocks impurities in diesel fuel and prolong service life.
> Bearing sealed design– protection level up to IP23.

03 Mute operation
>Sound attenuated enclosure – effectively reduces the unit operating noise. Dustproof and rainproof mute boxes can save computer room construction costs for customers.
>Industrial muffler – effectively reduces noise by 15-25 dB.
>Absorber – the engine, generator, and water tank are equipped with damping shock absorbers at the bottom, non-ordinary rubber shock absorbers.

04 Smarter and safer
>Optional cloud monitoring system for unit – remotely start and monitor the data.
>Famous brand intelligent controller – using RETECH intelligent controllers, which can reliably realize the automatic operation, monitoring, protection and other functions of the unit. When a failure occurs, it can effectively protect the unit from deep damage.
>Four protection systems – operation error alarm function avoids damage to the generator and prolongs its service life.
>ATS system (Automatic Transfer Switch) – the utility power and standby diesel generators are switched to form an interlock to effectively protect the power system safety.

05 Humanized design concept
>Engine oil outlet-guide tube degin , easy to clean
>The safety wind hook design-door can be hung on the box when it’s opened,easy for check and repair

06 Easy to use and maintain
>Electronic speed control – electrically adjustable high pressure fuel injection pump, easy operation and save fuel.
>Multi-functional LCD – avoid calibration instrument panel reading error, digital display more accurate.
>Multilingual – with a multi-language switching function, information reading is more convenient.

07 Quick-respond after-sales
>After-sales service station and accessory sales store around the world to quickly meet worldwide customers after-sales needs.
Product Configuration

Configuration details | HQ40GF | HQ60GF | HQ80GF | HQ100GF |
One diesel engine | 48KW | 66KW | 100KW | 108KW |
One generator | All copper Brushless HQF-40 | All copper Brushless HQF-60 | All copper Brushless HQF-80 | All copper Brushless HQF-100 |
Starter accumulator | 1 pc | 2 pcs | 2 pcs | 2 pcs |
One starter motor | 12V | 24V | 24V | 24V |
Configuration Details
(applicable to HQ40GF, HQ60GF, HQ80GF, HQ100GF generator sets)
Automatic intelligent controller | One | Inlet and outlet oil return pipes | 2 pcs |
Sound attenuated enclosure | One | Charging generator | One |
Base fuel box | One | Air filter | 1 set |
Electric actuator | One | Fuel filter | 1 set |
Battery connection wire | 2 pcs | Oil filter | 1 set |
Onboard data | 1 set | Diesel engine fan | One |
Simple repair tools | One | Water tank with fan | One |
Damping system | 1 set | Battery float charger | One |
communal base | One | Machine with charger | One |
Water tank radiator | One | Muffler elbow Bellows | 1 set |
Coupling | 1 set |
HQ80GF and HQ 100GF :
Water tank with fan: Monoblock closed cooling water tank Battery float charger: AC220V/DC24V
Working Principle
The diesel engine drives the generator to convert the diesel energy into electrical energy.

Product Parameters
Generator unit technical parameters | ||||
Unit model | HQ40GF | HQ60GF | HQ80GF | HQ100GF |
Overall dimension (L×W×H mm): |
1600*700*950 | 1600*720*1000 | 2100*800*1400 | 2100*800*1400 |
Sound attenuated enclosure dimension (L×W×H mm): |
2400*940*1570 | 2300*1000*1600 | 2900*1050*1700 | 2900*1050*1700 |
Unit weight | 450kg | 1300kg | 1460kg | 1824kg |
Noise | 95dB(A) | 75dB(A) | 75dB(A) | 75dB(A) |
Fuel consumption (100% load) | ≤210g/kW·h | ≤210g/kW·h | ≤204g/kW·h | ≤204g/kW·h |
Output power | 40KW | 60KW | 80KW | 100KW |
Output current | 72A | 108A | 144A | 180A |
Output voltage | 400V/230V/440V(can be customized) | |||
Power factor | COSΦ=0.8( lag) | |||
Rated frequency | 50Hz/60HZ(can be customized) | |||
Rated speed | 1500rpm | |||
Fuel grade | (Standard) 0# light diesel (ordinary temperature) | |||
Steady-state voltage regulation rate | ≤±1% | |||
Voltage fluctuation | ≤±0.5% | |||
Transient voltage regulation rate | +20%~-15% | |||
Voltage stabilization time | ≤1 S | |||
Steady-state frequency regulation rate | ≤0.6% | |||
Frequency fluctuation | ≤±0.5% | |||
Transient fluctuation regulation rate | +10%~-7% | |||
Frequency stabilization time | ≤3 S |
Diesel engine technical parameters | ||||
Cylinders/Cylinder body structure: | 4/L type | 4/L type | 4/L type | 4/L type |
Bore stroke | 105*118 mm | 105*118 mm | 105*130 mm | 105*130 mm |
Compression ratio | 17.5:1 | 17.5:1 | 18:01 | 18:01 |
Start mode | By electric | By electric | By DC24V electric | By DC24V electric |
Air inlet mode | Pressurize | Normally aspirated | Turbocharger | Turbocharger |
Cooling mode | Closed water circulation cooling | |||
Oil supply mode | Direct injection | |||
Speed regulation mode | By electronic | |||
Overload capacity | 110% | |||
Rotating speed | 1500rpm |
Generator Technical parameters | ||||
Rated voltage | 400V/230V/440V(can be customized) | |||
Insulation grade | Class H | |||
Protection grate | IP23 | |||
Wiring mode | 3 PH 4 wires,Y-connection | |||
Regulation mode | AVR (Automatic voltage regulator) | |||
Output frequency | 50Hz/60HZ(can be customized) | |||
Output factor | COSΦ=0.8(lag) |